Does The Torque Converter Bolt To The Flywheel. to do this, hold the converter onto the flywheel to check that the converter pilot fits properly into the rear of the crankshaft. If the gap is greater than.187 install a.060 flat washer. the flywheel is mounted to the back of the engine and is what the torque converter bolts to. In order for the engine and transmission to work together properly, it. no, the converter has to be fully seated in the transmission pump and it has to line up with the flexplate during. secure the torque converter to the flywheel with either a bolt through the flywheel to the mounting pads or in the case of ford. you must be able to turn the torque converter freely after installing the bellhousing bolts and before bolting the torque to the flexplate. align the bolt holes on the torque converter to the flywheel and insert the bolts. if gap distance is between.060 and.187 it is ok to bolt up the torque converter. the housing of the torque converter is bolted to the flywheel of the engine, so it turns at whatever speed the engine is running at.
no, the converter has to be fully seated in the transmission pump and it has to line up with the flexplate during. In order for the engine and transmission to work together properly, it. to do this, hold the converter onto the flywheel to check that the converter pilot fits properly into the rear of the crankshaft. If the gap is greater than.187 install a.060 flat washer. you must be able to turn the torque converter freely after installing the bellhousing bolts and before bolting the torque to the flexplate. secure the torque converter to the flywheel with either a bolt through the flywheel to the mounting pads or in the case of ford. the flywheel is mounted to the back of the engine and is what the torque converter bolts to. if gap distance is between.060 and.187 it is ok to bolt up the torque converter. align the bolt holes on the torque converter to the flywheel and insert the bolts. the housing of the torque converter is bolted to the flywheel of the engine, so it turns at whatever speed the engine is running at.
Torque Specs For Torque Converter To Flywheel
Does The Torque Converter Bolt To The Flywheel the flywheel is mounted to the back of the engine and is what the torque converter bolts to. If the gap is greater than.187 install a.060 flat washer. no, the converter has to be fully seated in the transmission pump and it has to line up with the flexplate during. to do this, hold the converter onto the flywheel to check that the converter pilot fits properly into the rear of the crankshaft. the flywheel is mounted to the back of the engine and is what the torque converter bolts to. In order for the engine and transmission to work together properly, it. secure the torque converter to the flywheel with either a bolt through the flywheel to the mounting pads or in the case of ford. the housing of the torque converter is bolted to the flywheel of the engine, so it turns at whatever speed the engine is running at. you must be able to turn the torque converter freely after installing the bellhousing bolts and before bolting the torque to the flexplate. if gap distance is between.060 and.187 it is ok to bolt up the torque converter. align the bolt holes on the torque converter to the flywheel and insert the bolts.